T-Wall

The T-WALL Retaining Wall System is a gravity structure constructed of individual precast T-WALL units. Each T-WALL unit consists of a front face panel and a stem, which extends back into and engages the soil. The standard height for the face panel and stem is 750mm. The face panel typically has a width of 1500mm. Stem lengths vary and are selected on the basis of wall height and stability.

The design for each T-WALL structure is carried out by Professional Engineers as part of the wall supply service. The wall structure is checked to ensure adequate safety factors for overturning (2:1), pullout(1.5:1) and sliding (1.5:1:). The bearing pressure along the underside of the wall is calculated using the Meyerhof method and checked against the allowable bearing capacity. Stamped shop drawings are available for each project.

The modular nature of the T-WALL® unit provides flexibility for wall layout and allows on-site modifications when unexpected conditions such as rock outcrops or existing services are encountered. SHAW PIPE provides the joint materials, filter fabric, special lifting devices and all other materials required for complete on-site wall erection.

SHAW PIPE offers one on one consultation for layout and design of T-WALL® projects. We will assist on the project from the conceptual stage, through to final design and on-site installation.

APPLICATIONS

T-WALL® provides cost effective solutions to a number of site conditions commonly encountered in commercial, industrial and public works. Typical applications include:

Highways, roads, and parking lots
Bridge abutments and wingwalls
Site development
Bank stabilization
Retaining walls